How To Tie A Blouse For A Dog

In order to tie a dog sweater, The following measurements should be taken – neck girth, tummy girth and length from the neck to the base of the tail. Then you should make a simple pattern that can resemble the letter T or G. To make the product sit well on the animal’s body, a second jumper is made, passing behind the front paws along the chest or tummy (depending on the sex of the dog).

To tie a cape for a dog To tie a blanket for a dog To tie a vest for a dog

Tie a dog blouse Tie a dog jacket Tie a dog jumpsuit

You will need: 80 g of primary color yarn (40% acrylic and 60% wool), 20 g of yarn for the pattern, needles No. 4, 4-5 buttons, needle.

Performance of work: The model is calculated on an average doggie. Blouse knit from neck to the bottom edge. The main thread to dial 60 loops and knit the collar with a pearl pattern, adding in each 2nd row 3 times on the 1st loop on both sides. After 5 cm from the initial row, continue work with an elastic band 1 Ѕ 1. After 10 cm from the initial row, go to the front surface and add 16 loops evenly.

After 15 cm from the initial row, divide the work as follows: 11 loops on the left side of the front, 5 loops to close for the armhole, 40 loops of the backrest, 5 loops to close for the second armhole, 11 loops on the right side of the front. Each piece is knit separately. After 6 cm from the place of separation of the loop, combine by typing 5 hinges over the closed loops. After 21 cm from the initial row, perform a jacquard pattern according to the scheme (Fig. 1).

Fig. 1 Scheme jacquard pattern.

After that, continue knitting with the main thread to the desired length, completing the last 3 cm with a pearl pattern. Then all loops are free to close according to the drawing. At the edges of the shelves on the knitting needles, make loops, excluding 5 cm of the collar, and knit a 1.5 cm wide stitch with a pearl pattern. On one of the sides, make 4-5 holes for buttons, placing them at regular intervals from each other. Sew buttons according to the holes on the plate.

For the sleeve, type along the edge of the armhole with the main thread on 4 knitting needles, close them in a circle and knit a pearl pattern of 4-5 cm, then continue with an elastic band 1 Ѕ 1 to the desired length of the sleeve, after which all the loops should be closed in the same row. Do the second sleeve in the same way (fig. 2).

Fig. 2 Blouse "Darling".

Jacket for dachshund
This blouse for dachshund is knitted with a simple pattern and looks great from plain yarn or sectional dyeing yarn. The back of the model is decorated with a heart pattern.

You will need: 120 g of yarn (100% wool or acrylic), knitting needles No. 4, a set of 5 knitting needles No. 3.5, 5 buttons, a needle.

Work performance: Blouse knit from the neck to the bottom edge. Type 64 loops on the knitting needles and knit 4 cm with an elastic band 1, 1, then continue the work with the front stitch, distributing the loops as follows – 9 loops of the right wing, 2 raglan loops, 5 loops of the sleeve, 2 raglan loops, 28 back loops, 2 raglan loops, 5 loops of a sleeve, 2 loops of a raglan, 9 loops of the left shelf. At the same time on the back to perform the motif "heart", placing it on the central loops (Fig. 3).

Fig. 3 Heart motif.

To form the sleeves, add one loop in each front row before and after the raglan loops. The loop should be made in the form of a nakida, and knitted as a seam noose in the seamy row, then you will get a lace track along the sleeve line. Repeat additions 8 times, after which the loops of the sleeves and one raglan loop on each side should be removed per thread (Fig. 4)

Read more:  Pattern For York Do It Yourself With A Description

How To Tie A Blouse For A Dog

Combine the loops of the shelves and backs and knit on all the loops with the front satin stitch, continuing to knit a jacquard motif on the back loops. After 27 cm from the initial row, evenly subtract 5 loops 3 times in each 2nd row and continue with 1 Ѕ 1 rubber band; close all loops in one row at a total height of 34 cm. Lift the loops of the sleeves and distribute them on 3 knitting needles, close them in a circle and knit with the front satin stitch to the desired length of the sleeve. Then close all the loops. The second sleeve is similar. At the edges of the shelves on the needles, loop and knit the strap with an elastic band 1 Ѕ 1, after 2 cm close all the loops. On one of the slats, make 5 holes for buttons (Fig. 5).

Fig. 5 Blouse "Heart".

Jacket for dachshund
A comfortable and beautiful blouse is knitted with a simple pattern, and the decoration is a beautiful frill around the collar. The model is designed for dog breed dachshund.

You will need: 100 g of yarn (100% wool or acrylic), knitting needles No. 3.5, 6 buttons, needle.

Performance of work: It is calculated on a taxi. Blouse is knitted from the gate to the bottom. On the knitting needles dial 112 loops, knit 8 rows of garter stitch. Further work to continue the facial smoothness. After 4 cm of all knitting, knit 2 loops in one row together and then continue the work with an elastic band 1 Ѕ 1. After 4-5 cm from the beginning of the gum, continue knitting to continue the front satin stitch, adding 4 times in each 2nd row from both sides on one loop .

After 11-12 cm from the initial row, the work should be divided into three parts: 10 loops – the right side of the front, 3 loops close for the armhole, 38 loops – for the back, 3 loops close for the armhole and 10 loops – for the left side of the front. Each piece is knit separately. After 6 cm from the place of separation of the loop, merge again, and above the closed loops of the armholes, dial 3 loops respectively.

Next, knit the front satin on all the loops. After 27 cm from the initial row, go to the elastic band 1 Ѕ 1 and, on a total length of 32 cm of the product, close all loops in one row. At the edges of the shelves on the knitting needles, make loops and knit the strip with an elastic band 1 при 1, while making 6 holes for buttons on one shelf, placing them at regular intervals from each other. After 2 cm from the beginning of knitting stitches close all the loops. Sew buttons to holes. At the edges of the armhole, type loops and distribute them on 3 needles, knit the sleeve with an elastic band 1 Ѕ 1. Close all loops in the same row, tying to the desired length of the sleeve. Perform the second sleeve in the same way (Fig. 6).

Fig. 6 Blouse "Glamor."

Blouse on the middle dog
A simple embossed pattern adorns the entire blouse fabric, making it voluminous. For a product it is best to choose a single color yarn. The model is designed for a medium sized dog.

You will need: 100 g of yarn (100% acrylic or wool), knitting needles No. 3.5, 4-5 buttons, needle.

Performance of work: Calculation of loops on an average doggie. The product knits from the neck to the bottom edge. On the knitting needles, dial 68 loops and knit the strip with an elastic band 1 Ѕ 1, after 5 cm from the beginning of knitting, add 14 loops evenly and continue the main pattern according to the description:
1st row – * 6 face loops, 2 purl loops **, repeat from * to **.
2nd all even rows – all loops knit on the pattern. 3rd row – * 5 face loops, 2 purl loops, 1 face loop **, repeat from * to **.
5th row – * 4 face loops, 2 purl loops, 2 face loops **, repeat from * to **.
7th row – * 3 front loops, 2 purl loops. 3 facial loops **, repeat from * to **.
9th row – * 2 face loops, 2 purl loops, 4 face loops **, repeat from * to **.
11th row – * 1 front loop, 2 purl loops, 5 face loops **, repeat from * to **.
13th row – * 2 purl loops, 6 face loops **, repeat from * to **.
15th row – * 1 purl loop, 6 face loops, 1 purl loop **, repeat from * to **.
17th row – * 6 front loops, 2 purl loops **, repeat from * to **.
19th row – * 5 face loops, 2 purl loops, 1 face loop **, repeat from * to **.

Read more:  How To Tie A Jumpsuit For Dogs - Step By Step Instructions

After 13 cm from the initial row of the loop, divide as follows: 9 loops of the right shelf, 5 loops to close for the armhole, 42 back loops, 5 loops to close for the armhole, 9 loops of the left shelf. Each part is knitted separately, continuing to perform a relief pattern. At a height of 5 cm from the place of separation of the loop reunite again, typing over closed 5 loops, respectively. At a total height of 30 cm go to the gum 1 Ѕ 1, knit another 2-3 cm and close all the loops in the pattern.

At the edges of the armhole to raise the loop and distribute them on 4 spokes. Knit the sleeve in circular rows with an elastic band 1 1 to the desired length, after which all loops are closed. The second sleeve is similar. At the edges of the shelves on the knitting needles, make loops and knit the slats with an elastic band 1 Ѕ 1, 1.5 cm wide, making holes for buttons on one of them. On the second bar, sew buttons on the stitches, respectively, (Fig. 7).

Fig. 7 Blouse "Dream".

Blouse on pug
Blouse adorns a beautiful braided pattern that looks great from monophonic yarn. The model is designed for a pug breed dog.

You will need: 100 g of yarn (100% wool), knitting needles No. 4, 5 buttons, a set of 5 knitting needles No. 3.5.

Performance of work: Calculation of loops for a pug. Blouse is knitted from the bottom edge to the neck. On the knitting needles, dial 92 stitches, knit 8 rows of garter stitch, then continue the work with the basic pattern as described.

1st row – * 4 purl loops, 2 face loops **, repeat from * to **.
2nd and all the even rows – all the loops knit on the pattern.
3rd row – knit like row 1. 5th row – front loops.
7th row – 1 purl loop, * 2 face loops, 4 purl loops **, repeat from * to **, 1 purl loop.
9th row – knit like row 7. 11th row – knit like row 5.
To form a pattern in height, repeat the 1st to 12th rows.

After 25 cm from the initial row of the web loop, divide into parts: 15 loops on the left side of the front, 5 loops close for the armhole, 52 back loops, 5 loops to close for the armhole, 15 loops of the right side of the front. Each part is knit separately, continuing on each of them the main pattern. After 6 cm from the place of separation of the loop, merge again, typing over the closed loops, respectively, 5 new each. At the same time, on both sides of each 4th row, lower the 1st loop 6 times, then switch to the garter band and knit 8 rows. Then close all the loops in the same row.

At the edges of the armhole, assemble loops, distribute them on 4 knitting needles and knit a garter stitch hose (alternate 1 row of front loops, 1 row of back loops) to the desired length, after which all loops close in the same row. The second sleeve is similar. For the slats on the edges of the needles, make loops and knit a 6-row knitting stitch, while making 5 holes for buttons on one side. Sew buttons on the opposite side (Fig. 8).

Fig. 8 Blouse "Journey".

Blouse on a little dog
A small blouse with short sleeves knits from thin yarn with a simple pattern is a wonderful option for a small dog.

You will need: 60 g of yarn (100% acrylic), knitting needles No. 3, a set of 5 knitting needles No. 2.5, 4 buttons, a needle.

Read more:  Clothes For Dogs With Their Own Hands Patterns, How To Sew Overalls For Large And Small Breeds,

Performance of work: Calculation of loops for a toy terrier. Blouse knit from neck to the bottom edge. On the knitting needles, dial 66 loops and knit 6 rows with garter stitch, then continue the work with the front satin stitch, while for the strap the first and last 4 loops are knitted with garter stitch. On the right bar to make holes for buttons, placing them 3 cm apart. To make a buttonhole in the same row, close the 4th loop, and in the next row add 1 air loop respectively. After 8 cm from the beginning of knitting, make holes for the front legs, for which the loops are distributed as follows: 12 loops of the right shelf, 4 loops to close for the armhole, 34 back loops, 4 loops to close for the second armhole and 12 loops of the left shelf.

Each item is knitted separately. After 4 cm, combine all the parts, adding respectively between the shelves and the back of 4 loops. On the received loops knit 3 cm in height with the front satin stitch, continuing to knit the garter stitch on the right and left. To narrow the detail in each 2nd row, lower on both sides 4 times in the 1st loop. Reductions should be performed on the right side after the stitches loops and on the left side up to the stitches loops. The last 6 rows of knit garter stitch, then close all the loops in the same row. Along the edges of the armhole for 4 needles, make loops and knit a garter stitch hose (alternate – 1 row front loops, 1 row purl loops). Linking to the desired length, all loops are free to close. The second sleeve is similar. Sew buttons to the finished product (Fig. 9).

Fig. 8 Blouse "Joy."

Blouse for toy terrier.
A charming blouse knits with a beautiful openwork pattern of melange yarn or sectional dyeing yarn. The model is designed for toy terrier dogs.

You will need: 80 g of yarn (100% acrylic), knitting needles No. 3, a set of 5 knitting needles No. 3, 5 buttons, a needle.

Performance of work: Calculation of loops for a toy terrier. Blouse knit from neck to the bottom edge. On the knitting needles, dial 120 stitches, knit 4 rows with a garter stitch, then knit the front stitch with 8 rows and in the next front stitch, reduce the number of stitches by half, knitting 2 loops together on the front one — a frill. Then continue the work with the front satin stitch and divide it into three parts at a height of 8 cm from the initial row of the loop, 8 loops of the left shelf, 4 loops close for the armhole, 36 back loops, 4 loops close for the armhole, 8 loops of the right shelf. Each part is knitted separately and at a height of 4 cm from the place of dividing the loop again, combining between the loops of the back and the shelves with 4 loops, respectively. Knit 4 rows with the front satin stitch and add 14 loops evenly in the same row and continue to knit with an openwork pattern as described.

1st row – 1 edge loop, * knit 2 loops together on the front 3 times, knit 6 times, alternating 1 face loop and 1 nakid, knit 2 loops together on the front 3 times *. Repeat from * to *, 1 edge loop.
2nd row – all the loops and nakida knit purl.
3, 4th rows – all knit loops facial.
To form a pattern in height, repeat the 1st through 4th rows.

Knit to the desired length of the blouse, with the last 4 rows knit garter stitch and close all the loops. At the edge of the armhole, make loops, distribute them on 4 needles and knit a garter stitch in circular rows to the desired length, after which all loops are closed. The second sleeve is similar. At the edges of the shelves, on straight needles, make loops (except frills) and knit garter stitches, close all 4 loops after 4 rows. On one of the slats to make holes for buttons. Sew buttons (Fig. 10).