How to bind a sleeveless jacket for the dog
Test probeGather 22 loops and knit 20 rows with an English eraser. The finished sample is slightly stretched in width ↔ and measured with a centimeter or a ruler.
Two extreme loops do not take into account. Let’s say it turned out 20p. = 13cm. (I will write further from these calculations). 20/13 = 1.538 …
Measure the volume of the breast. 41cm.
41 * 1.5 = 61.5. Round down. = 60 loops.
Knit romper for dogs
The overalls connected according to this scheme have their pros and cons.
Of the benefits … It does not require complex calculations. Such a jumpsuit is convenient to wear. Correctly selected buttons themselves are an ornament. And most importantly – the breast of this jumpsuit can be entirely connected with any pattern you like, be it openwork, stripes or a multi-color pattern.
The disadvantage is that the beautiful buttons are now expensive and significantly increase the cost of the product. Such a jumpsuit is difficult to knit without trying on and it does not suit all dog breeds.
Examples of coveralls connected by this scheme:
If you are going to use medium thickness yarn. enough dial 22 loops and tie rows of 20, selected for the product viscous. (We will not consider the peculiarities of the calculation of loops for openwork patterns and braids. If you decide on them, it means that you have enough independent experience and you do not need my recommendations.)
The resulting sample is placed on a flat hard surface, if necessary, we fasten it with pins, so that it does not twist, and we apply a ruler. But choose a plot exactly in the middle of the canvas, not including edge loops. At the edges of the canvas deformations are possible, and we are interested in the already established picture. (pic. 1)
What do we think about when we dress up our little dog?
About it not to freeze? so she was comfortable ?. Or how fashionable and beautiful it will look on our hands?
When a thing is made from high-quality yarn, it will be very soft and pleasant to wear. We know this by ourselves, and how is a dog worse? She wants comfort too!
Looking at some dogs, it is safe to say that they are very comfortable and comfortable in clothes, and most importantly, IT IS BEAUTIFUL LOOKING!
Knitting for dogs
I noticed that knitting to my dogs is now in fashion!
Making knitted clothes according to individual measurements, any styles, sizes, colors
-The length of the back (from a tightly drawn collar to the base of the tail), can be measured as follows: put the dog in a stand, lift its head and measure well from the folds on the neck (from the back) to the beginning of the tail.
-Chest girth (measured in the widest place behind the front paws),
– distance between the front and hind legs. Put the dog in a stand and measure from where the front paw ends (from the armpit) to the beginning of the back paw in the groin (measured along the ribs along the body, along the side, parallel to the spine.
– the distance between the front legs (measured in front of the neck)
girth of neck (measured by a not-necked collar)
If the dog is a stretched format, then this is also important.
– Well, it is desirable height at the withers, which approximately represent the size
Pattern for overalls
We’ll have to take only one measure: the length of the back. To do this, put on, without tightening, the collar and measure the distance from it to the root of the tail. this is the length of the back (AB line in the diagram). Now divide the resulting number by 8 to find out the size of the side of the square of the grid on which the pattern is built. It remains to draw a grid and transfer pattern to it. Detail 1 must be a steam room. these are the right and left halves of the jumpsuit; detail 2 (unpaired, half is shown in the diagram). it is a wedge sewn between the front legs with a narrow end; he covers his chest and stomach. The pattern is designed for a poodle, but it is perfect for square-sized dogs of any size, only for them it is necessary to slightly reduce the width of the leg. Adjust the width and length of the leg when fitting, the bottom leg is collected on the gum. Such a jumpsuit does not prevent the dog from moving at all; it perfectly protects from wet snow, rain and wind, especially if it is made of two layers: the top. raincoat fabric, lining. from the flannel.
How to tie a comfortable dog vest
The basis for building patterns. back length To measure it, put on the collar without tightening it and measure the distance from it to the root of the tail. Divide the resulting number by 8 to find out the size of the side of the grid square. It remains to draw a grid with a side equal to 1/8 of the length of the back and transfer the pattern to it. Measure your dog’s waist and chest clips, check to see if they match the pattern. If necessary, increase the pattern in width.
Start knitting with gum should be. The number of loops is equal to the waist. Then gradually add loops on both sides of the knitting so that by the time you get to the notch for the paws, the number of loops equals the chest volume. Next, close the required number of loops (2 cm) for knitting the paws and knit the back and neck of the neck. Then the loops of the chest (up to this time remained unbound) are combined into one needle and knit to the required length. Sew the product on the abdomen and the front of the chest, sew the part that goes between the front legs. Along the edge of the neckline and the cutout for the paws, we gather loops and knit a rubber band to the desired length. If you add sleeves to this vest, you get a sweater.
HERE SO LOOKS LIKE A COSTUME FOR DOGS!
MORE ONE SWEATER!
Sweater N1 with elastic bands on the sides on the stomach. In the photo on the terrier.
Knit the product from the top. On the needles N1 (2), we put 57 loops in one thread and we knit in a circle, with an elastic band 1×1, 20 rows. Next, change the needles to N4 (5) and add the second thread, knit another 1 row. Divide knitting into two parts on the sides of the sweater. Knit English elastic back 7 cm (until the end of the sweater). We remove one thread and we knit with an ordinary 1×1 rubber band – 10 rows, close the loop. The back is ready. Back to the beginning. We knit English rubber band in front of 6 centimeters. Next, you need to close the loop for the sleeves (holes for the legs). We begin to close the loops: we close 10 loops, knit the next 6 loops as usual (with an English eraser) and close another 10 loops. Knit now breast English elastic. So, the structure of the dogs is different, so that the sweater sits better, we knit the breast 7 cm. Now we add 5 loops on both sides (closed by 10, and now we add 5). We knit in front of 7 cm, remove 1 thread and knit with a usual 1×1 rubber band in one thread of 10 rows, close the loop.
Next, you need to link the side elastic sweaters. To do this, you need to dial on each side of the loop sweater. on the back on both sides and on the front on both sides. On each side we collect in one thread, with thin knitting needles of 36 loops. And we knit the side elastic bands on 10 rows, without forgetting to make buttonholes on elastic bands, which will be on the back. Close all the loops. We sew the opposite parts of the elastic bands (the elastic of the back is sewn along the edge to the elastic in front of the place where the sleeve will be (with the armpit). We put loops from the holes for the sleeves in one thread. We knit 15 rows with a usual elastic band. We close the loops.
N2 sweater with neckline buttons. In the photo on the Chihuahua.
Knit the product from the top. On the knitting needles N1 (2), we put 57 loops in one thread and knit with 1×1 elastic band with usual knitting, 18 rows, not forgetting to make two buttonholes from the edge. Close the knitting in a circle and knit 4 more rows with a rubber band in a circle. Next, change the needles to N4 (5) and add the second thread, knit another 1 row. Divide knitting into two parts on the sides of the sweater. Knit English elastic back 7 cm (until the end of the sweater). We remove one thread and we knit with an ordinary 1×1 rubber band – 20 rows, close the loop. The back is ready. Back to the beginning. We knit English rubber band in front of 6 centimeters. Next, you need to close the loop for the sleeves (holes for the legs). We begin to close the loops: we close 10 loops, knit the next 6 loops as usual (with an English eraser) and close another 10 loops. Knit now breast English elastic. So, the structure of the dogs is different, so that the sweater sits better, we knit the breast 7 cm. Now we add 10 loops on both sides (those that were closed to cut the sleeves). We knit in front of 7 cm, remove 1 thread and knit with a usual 1×1 rubber band in one thread of 10 rows, close the loop. We sew the opposite parts of the sweater on the sides. We assemble loops from the holes for the sleeves into one thread. We knit a regular 1×1 rubber band on fine needles 15 rows. Close the loop.
Hat knit is very simple. We collect 20 loops in one thread on thin needles. We knit a rubber band 1×1 – 5 rows, add the second thread and turn to the thick needles. We knit 2 rows of 1×1 rubber and go to the English gum. We knit a rubber band with a scarf – about 45 cm., We knit 2 rows with an ordinary 1×1 elastic band, we remove one thread, we turn into thin needles, we knit 5 rows. Close the loop. From one edge do not forget to make a buttonhole., And on the other hand sew a button. We fold the scarf in half and sew it with a corner of 7 cm. At the corner we sew a pompom or a brush.