How To Tie A Dress For A Dog

Charming dress for dog fit simple facial satin stitch, and you can decorate it with a beautiful crocheted frill. The model is designed for dogs of small breeds.

To tie a cape for a dog To tie a blanket for a dog To tie a vest for a dog

Tie a dog blouse Tie a dog jacket Tie a dog jumpsuit

Tie dress for a small dog
You will need: 120 g of yarn (100% wool or acrylic), No. 3.5 letter, set of 5 needles No. 3, 5 buttons, needle.

Performance of work: Take measurements from a dog – neck girth, distance from neck to the beginning of the front paws (measure along the center of the breast), front legs girth, chest girth, dog body length (half or 2/3 of the length from neck to tail is taken for the dress) . Calculate the number of loops for girth neck and chest, calculate the difference. On the needles No. 3.5, type the required number of loops and knit a scarf knit knit of 3-5 cm, then add the required number of loops based on the difference between the loops of the neck and the breast. Add loops in the same row at regular intervals and knit to the desired height of the breast, after which the loops should be divided into three parts: 2/3 parts – back loops, 1/3 part – breast, while closing 4-5 loops for each armhole, taking them from the calculation of the back.

Each part is knitted separately to a length equal to half the girth of the front paws. Then re-merge all the loops by typing the appropriate number of loops over the closed loops. Tying up to the required length of the tummy, knit 6 rows of garter stitch, then double the number of loops in the next front row and knit the length of the skirt 6-8 cm, depending on the size of the dog. At the same time, the last 6 rows should be made with a cloth stitch, after which all the loops should be closed in the same row. Run the seam skirt.

At the edges of the armhole on the spokes No. 3, make loops, distribute them on 4 needles and knit in circular rows with a garter stitch sleeve of the required length, for example, up to the middle of the legs. Along the edges of the shelves (except for the skirt), on the needles No. 3, make loops and knit 4 rows of garter stitch, then close all the loops in the same row. On the second bar to make 5 holes for buttons, placing them at regular intervals from each other. Sew buttons (Fig. 1).

How To Tie A Dress For A Dog

Fig. 1 Dress "Vorozheya".

Dress for a little dog
A beautiful dress for a small dog is useful for walking or going out.

You will need: 120 g of yarn (100% wool or acrylic), knitting needles No. 3, a set of 5 knitting needles No. 3.

Performance of work: Take measurements for a dog – neck girth, length to the middle of the back, girth of the front paw, distance between the front paws. Calculate loops for dialing. On the spokes, dial the required number of loops, distribute them on 4 needles and close them in a circle. Knit the collar of the dress with an elastic band 1 Ѕ 1, after 3 cm from the start of knitting work continue with the pearl pattern, with all the loops distributed as follows: 2/3 back loops, 2 raglan loops, 3 sleeve loops, 2 raglan loops, 1/3 breast loops, 2 raglan loops, 3 sleeve loops, 2 raglan loops. With this distribution, the loop of sleeves and raglan lines are taken halfway from the loops of the back and the breast.

Then knit, forming a raglan, adding in each 2nd row along the 1st loop before and after the raglan line, namely 8 loops in every 3rd row. Knit up to the required length of the breast (according to the measurement), then remove the loop of the sleeves on pins or threads, grabbing one loop from the raglan lines on both sides of the sleeve. The loops of the back and breast combine and knit in circular rows, continuing the pearl pattern. Knit to the desired length of the dress, then execute the openwork row (* 2 loops, knit together the front one, 1 nakid *, repeat from * to * around the circle), then knit another 2 rows with a pearl pattern and divide the loops into 4 equal parts, mark them with a thread of contrasting color.

Read more:  How To Tie A Dress For A Dog

Then knit the skirt of the dress with the purl stitch, adding in each 3rd row along the 1st loop before and after the loop. Add loops in the form of nakida, which knit in the next front row purl loop. Knit the skirt of the required length, while for 4-6 rows until the end of the skirt add one loop after each 2nd loop. Next, knit 4-6 rows with a pearl pattern and close all the loops in the same row. At the edges of the armhole on the needles, make loops, distribute them on 4 needles and knit in circular rows with a purl to the required length of the sleeve, with the last 4 rows knit with a pearl pattern. The second sleeve is similar. From the remnants of the yarn to twist the lace, the length equal to the two waist girth of the dog. Draw a lace through the holes of the openwork row at the waist of the dress (Fig. 2).

Fig. 2 Dress "Madam".

Dress – dog dress
The sleeveless dress is knitted from cotton or acrylic yarn with a simple openwork pattern and is suitable for summer walks.

You will need: 120 g of yarn (100% cotton or acrylic), hook No. 2.5, 4-5 buttons, needle.

Performance of work: Knitting of a dress begins from a dog’s waist. Tie the initial chain of air loops, the length equal to the waist girth of the dog plus 2-3 cm to fit, the number of loops should be a multiple of 10, plus 3 air lift loops. Continue to knit straight and reverse rows of openwork pattern according to the description.

1st row (initial) – knit the 1st column without crochet into the 2nd loop from the hook, * 2 columns without crochet, 3 air loops, 2 base loops to skip, 1 double crochet, 3 air loops, 2 base loops skip, 3 columns without crochet *, repeat from * to * to the end of the row.
2nd row – 1 air lift loop, * 2 columns without crochet, 3 air loops, 3 columns without crochet, 3 air loops, 1 column without crochet *, repeat from * to * to the end of the row.
3rd row – 3 lift air loops, * 3 air loops, 5 crochets, 3 air loops, 1 crochet crochet into the middle of 3 bars without crochet of the previous row *, repeat from * to * to end of row.
4th row – 1 lifting air loop, * 2 columns without a nakida, 3 air loops, 3 columns without a nakida knit on three central columns without a nakida of the previous row, 3 air loops, 1 column without a nakida *, repeat from * to * until the end of the row.
5th row – 1 air lift loop, * 3 columns without a nakida, 3 air loops, 1 double crochet column in a middle column without a nakida of the previous row, 3 air loops, 2 columns without a crochet *, repeat from * to * to the end of the row.
To form a pattern in height, repeat the 2nd to 5th rows.

Knit the fabric from the waist to the start of the front legs. Next, mark the middle of the canvas, retreat to the right half the distance between the front legs of the dog and knit the right strap to the desired length. The width of the strap to determine their own, depending on the size of the dog. A strap can be knitted with double crochets or you can continue knitting with an openwork pattern to the desired length. Next, knit a skirt, for which the thread is fastened at the beginning of knitting, close the strip of the breast in a circle and knit on the front side in circular rows with double crochets. At the same time, at the beginning of each row, perform 3 lifting air loops instead of the 1st crochet. Row end connecting rod in the 3rd loop lift.

To expand the canvas in the first circular row, knit 2 double crochets into each 2nd loop of the base, then knit 2 double crochets into the next row into the third double crochet of the previous row. Extensions repeat until the desired length of the skirt. The last row of the skirt should be made with single crochets in each loop of the base. Tie the outer edge of the top of the dress in one row with single crochets, while making 4-5 button holes on the sides of the shelf. Strap seams to the shelves, determining their location by fitting. Sew buttons to the eyelets for them (fig. 3).

Read more:  Clothes For The Four-Legged Friend - Fashionable Clothes With Their Own Hands

Fig. 3 Dress-dress "Bug".

Dress for dogs with a pattern
A dress in a blue – white strip for a dog that is about to spend her vacation at sea.

You will need: For 50-60 g of blue and white yarn (100% cotton or acrylic), a set of 5 needles number 3.

Work performance: Take measurements: neck girth, waist girth, breast width, back width. Calculate loops. On the knitting needles, dial with the blue thread the necessary number of loops to girth the neck, distribute them on 4 needles, close into a circle and knit with an elastic band 1 1 in circular rows, and at the same time carry out a pattern of stripes alternating 2 rows of blue and white yarns. After 4-5 cm from the start of knitting, go to the front surface and perform a pattern of stripes, alternating 4 rows of blue and white yarn.

Next, divide the loops as follows: leave the loops of the backrest according to the measure and leave the loops of the breast according to the measure, close the other loops (armholes) between them. In this case, the loops of the back should be 1.5 times larger than the loops of the breast. Continue to knit straight and reverse rows, performing each part separately and maintaining the pattern of stripes. At the same time, on both sides of each part, add in each 4th row along the 1st loop. Knit in this way to the required height of the armhole, which corresponds to half the circumference of the dog’s front paw (Fig. 4).

How To Tie A Dress For A Dog

Fig. 4 Pattern dress patterns.

After this, the loops of the back and the breast should be reunited again by dialing the required number of loops between them, and the initial number should be the same as when dialing. Then continue the work in circular rows with an elastic band 1 Ѕ 1, making a pattern of stripes alternating 2 rows of blue and white yarn. Knit to the total length of the product, equal to the distance from the neck to the waist, and then knit the skirt.

To extend the skirt fabric, divide all loops into 8 equal parts, mark the corresponding loops and add one loop before and after the mark in each 3rd circular row. Hinges add in the form of a nakida, which in the next row to knit facial. Skirt to knit to the desired length, with the last 4 rows to perform a garter stitch and close all the loops (Fig. 5).

Fig. 5 Dress "Sailor".

Dress with ruffles for dogs
A lovely dress for a little doggie is decorated with luxurious ruffles on the collar and sleeves.

You will need: 120 g of yarn (100% acrylic), a set of 5 needles No. 3, a tape 1 cm wide in tint of yarn.

Performance of work: Take measurements from a dog – neck girth, chest girth, distance between the front paws on the breast and back, girth of the front paw, length of the front paw, height of the breast is measured from the neck to the armpits. Calculate loops for neck girth and chest girth, calculate the difference.

On the knitting needles, dial the number of loops, 2 times more than is required for neck girth, distribute them on 4 needles, close into a circle and knit 4 rows of garter stitch, alternating 1 row of purl loops and 1 row of facial loops. Further work to continue the facial smoothness. After 2 cm from the beginning of knitting, the number of loops should be halved, knitting 2 loops together in the same row. Run openwork collar on the description:
1st row – purl loops.
2nd row – facial loops.
3rd row – * 1 front loop, 2 loops knit together purl, 1 nakid * repeat from * to *.
4th row – facial loops.
5th row – purl loops.

Then continue the work with the front satin stitch, distributing the loops as follows: 1/3 of the loops – breast, 2 loops of the raglan line, 3 loops of the sleeve, 2 loops of the raglan line, 2/3 of the loops – back, 2 loops of the raglan, 3 loops of the sleeve, 2 raglan loops. At the same time, take loops for raglan lines and sleeves equally from the back and breast parts. To form a raglan line, add one loop in each 3rd row before and after the raglan loops. Repeat the addition to the desired length equal to the height of the breast. After that, the loops of the sleeves and one loop of the raglan line on both sides should be removed on a string or pin, and the loops of the back and the breast should be combined, closed into a circle and continue knitting in circular rows.

Read more:  How To Knit Clothes For A Dog With Knitting Needles

Knitting the main part of the dress to the waist, make a tracery strip, repeating the same rows as for the collar. After that, perform extensions for the skirt, for which you add one loop in each 2nd row at the beginning and end of each spoke. Loops add in the form of nakida, knit them in the next row facial. Knit to the desired length of the skirt, following the last 5 rows on the description of the collar. In the next row, all the loops are free to close in the same row.

Lift the hinges of the sleeves onto the spokes, distribute them on 4 knitting needles, close them in a circle and knit with a frontal stitch equal to 1/3 of the foot’s height. Then, perform openwork hemming, repeating the 1st to 5th rows as for a collar, double the loop in the next row, knit 4 rows with the front satin stitch, 1 row with back loops, and in the next row loop the closes freely in one row. Thread the ribbons through the openings of openwork banding, and tie the ends on the face of the dress with ribbons (Fig. 6).

Fig. 6 Dress "Princess".

Dress – a tunic for a dog
A cute dress with a short skirt should be knitted from yarn with the addition of mohair, then you get a warm and beautiful thing for your dog.

You will need: 100 g of yarn (60% acrylic and 40% mohair), a set of 5 needles No. 3.

Performance of work: Take measurements for a dog – neck girth, chest girth, back width (measure between the front paws along the back), breast width (measure between the front paws along the breast), distance from neck to shoulders, body length from neck to waist . Calculate loops for neck girth and chest girth, calculate the difference between them. On the spokes, make loops designed for neck stranding, distribute them on 4 knitting needles, close into a circle and knit in circular rows with an elastic band 1 1 collar 10 cm high. After knitting a 5 cm collar, shift the pattern by 2 loops for bend. Then uniformly add the required number of loops, the number of which should be a multiple of 6. Next, knit the main pattern according to the description.
1, 4th rows – front loops.
2, 3rd rows – * 3 front loops, 2 back loops, 1 front loop *, repeat from * to *.
5, 6th rows – * 2 purl loops, 4 face loops *, repeat from * to *.
To form a pattern in height, repeat the 1-6th rows.

Knit up to a length equal to the distance from the neck to the shoulders, after which the loops should be divided as follows: the breast (the number of loops corresponds to the width of the breast), 6 loops close for the armhole, the back (the number of loops corresponds to the width of the back) and 6 loops close for second armholes. On the loops of the backs and breasts, knit separately in straight and back rows, continuing the basic pattern. Each item is knit to the desired height of the armhole, which corresponds to half the girth of the front paw. After that, the loops are again combined, having typed over 6 loops over the closed loops. On the combined loops, knit the main pattern to the required length of the dress, after which perform a frill as follows:
1st row – * 1 front loop, 2 purl loop *, repeat from * to *.
2nd row – knit 5 loops from each front loop (1 front loop, 1 back loop, 1 front loop, 1 back loop, 1 front loop, 1 back loop).
3, 4, 5, 6, 7, 8, 9, 10th rows – * 5 face loops, 2 purl loops *, repeat from * to *.
Then close the hinges in the same row.

For the sleeves on the edges of the armhole, type loops, distribute on 4 needles, close into a circle and knit in circular rows with an elastic band 2 2 to the desired length of the sleeve, after which all loops should be closed in the same row (Fig. 7).